·EPS characteristics
1. An electric power grid is in a steady state with no noise, less than 60db, and without smoke exhaust and shock treatment, and also has the advantages of pollution-free and nofire hazard.
2. It can automatically switch, can be realized unattended. It is energy saving, and the switch time between power supply and EPS power supply is 0.1-0.25S.
3. With a strong capacity, EPS is adapted to inductive, capacitive and comprehensive load of equipment, such as fire service elevators, pumps, fans, emergency lighting, etc., especially in the accident or fire strong cut, the power supply can work in 120% overload state until the battery completely runs out.
4. It is reliable and can be used on important occasions with dual machine of hot backup mode to ensure the reliability of electricity supply in accident and fire cases, while the host can live for more than 20 years, and the battery 5-10 years.
5. To adapt to harsh environment, it can be placed in the basement or distribution room, and even wrapped by the construction shaft. You can use the sites nearby to set an emergency load-place to reduce the supply line. It may also be controlled by the fire linkage.
6. For some large electric power facilities, such as fire pumps and fans, EPS can also be connected directly with motor conversion started, and re-enter the normal operation state, which can save motor soft start and control box settings.
7. Emergency standby time: Standard model is 60 minutes (delayed interface), which may be longer or shorter.
Copyright ? 2003 - 2023 . All Rights Reserved